Manualshelf

Instructions / Assembly

ManualsBrandsRobtec ManualsFence Hardware2-3/8 in. Black Chain Link Fence End Post Kit
1234
- 2 -
Where the parts go to...
Install Terminal Posts
How to assemble...
1. Dig holes about 8 in. in diameter and 20-30 in. deep.
2. Place terminal post inside the hole and mark the ground level on post. Post height above
ground should be the height of chain-link fabric plus 2 in. Remove the post.
3. Pour wet concrete into holes ll 3-4 in. beneath ground level. Do not fill holes to top.
4. Place the post in the center of hole. Backfill with dirt and step on the backfill to pack.