Operation Manual
5
B: Indicator light of Bluetooth.
C : The green indicator light. It will keep
shinning when it’s under the opening
model which means the system is under a
normal state, otherwise, it will turn off
with indication that there is something
wrong with the system.
D:The red indicator light. When you find
the indicator light turning red, that
means the system goes wrong and you
should seek help from the local agent or
contact with us directly.
5. Instructions of battery of Robin
This part mainly describes how can you get Robin charging at home, how to take good care
of the battery, needed precautions and specifications of battery.
To protect your safety and to maximize the
service life of the battery, please operate it
under the following instructions.
5.1 Zero power
Please stop riding Robin when you find all lights shut down. At the time, the system will
gradually slow down, and within 7 seconds shut down automatically. If you insist the riding,
you may fall from Robin and get injuries and cause damage to the battery.
You should stop using the battery under any of these conditions listed follow:
The battery is broken.
Peculiar smell came out from Robin or it’s overheat.
Only technicians can make maintenance with the battery.
Any leaking material came from the Robin.
Never touch the leaking material.
Never let children and animals touch the battery in case of any injuries.
Make sure that the power line is off from Robin before riding and never do anything with
Robin while it’s charging.
There are toxic substances inside the battery, so never be attempted to open it or
unclench it with any equipments or even put any other material into the battery.
Only equipments provided by us can be use to charging of Robin.
The battery of Robin can only put into usage under the admission of the local law.
5.2 Procedures of charging
Open the charging port behind the Robin.
Make sure that the charging port is dry.
Plunge one side into the charging port of Robin and the other side into the electric power
source.
If the lights keeping shinning one by one from the display board, it means it’s under
normal condition. Otherwise, please take a double check with the power lines.