Operation Manual

4
4. Controlling of Robin and the display board
4.1 Remote control of Robin
Remote control of Robin is a long-distance equipment of controlling, you can make a control
of Robin within 10 meters.
 A: the beginner model. Pressing this button so you
can enter into the beginner model which speed limit within
7km per hour. If you don’t use it for more than 10minites,
then Robin will shut down automatically.
 B: warning and locking. Pressing the button so
Robin itself can keep locked and send notice with
bumming and vibrating while someone else is attempt to
move it. If you want to unlock it, just press it again.
However, if you kept the Robin in the state of bumming
within 24hours, it will turn off automatically.
 C: normal model. You have to turn off the beginner
model when you want a normal model. Turn off the power
and then turn it on so you can enter into the second model
with speed limit within 15km per hour.
 D: shutdown. Press the button and Robin will be power off.
 A + C : Press button A and C within 5 seconds can enter into the model of self-checking.
In the state of self-checking, you will hear the bumming sound and all five lights keep
flickering. The system of Robin itself will conduct a series of self-checking, in the mean while,
the wheels will turn on automatically in a slow speed. If there is no problem after the
self-checking, the system will recover to the normal model. Otherwise, warning sound of
beeping will come from the buzzer and it will turn off automatically. Under this condition, we
insist that you should send the Robin to your local agent or contact with us directly.
4.2 Pedal sensor
There are four sensors under the pedal, any of them stepped upon by users, Robin will enter
into the balance model automatically.
 Please make sure that your feet are
standing on the pedals during riding.
 Please never put any objects on the pedals
in that it will keep the system opened and increase the possibility of collision and even
damage to Robin, finally cause physical injuries to users.
4.3 Display board
The display board of Robin is fixed on the top of the battery. It shows information about
Robin during riding.
A: Display board of electrical quantity.
Normally, all five lights will keep brightening when the power is sufficient. Five lights means
Robin is fully charged, four means there is 60 % ~80% power left. Under the model of
charging, five lights will flicker one by one, and when the charging is over, all of them will
flickering at the same time.