Operation Manual

3
the torque and the running speed so that Robin can be balanced itself.
It seems like human body in that the moment you move forward you have to step forward
to keep balanced. In a word, when you stand up on the Robin, the power unit will make its
wheels to lean forward or backward so that you won’t fall down from the Robin.
Regarding to the handlebar, when you sway it into your right side, it turns right; when you
control it to your left side, of cause, it goes left. But when you make it stands still on the
middle, it will keep the direction straightly all the time.
We suggested that all users should lean right or left when he sway the handlebar
respectively. Because the inertial dynamic system inside Robin body can only control the
level of forward and backward instead of right and left. Therefore, to avoid centrifugal forces
in turning and to increase the security of riding Robin, we insists that users should take the
advice above seriously.
3. Installation of Robin
In this part, we will talk about what spare parts does Robin has and how can we assemble
Robin by ourselves.
3.1 Double check the spare parts inside the package
Please check the package of Robin and make sure that all spare parts are completed. The
spare parts of Robin are listed as follows, if any of them missing, please contact with the local
agent or us directly.
1) Car body
2) Handlebar grip
3) Handlebar stem
4) Charger
5) Bag of screws
6) Bag of tools
7) Remote key
8) User’s Manual
9) Guarantee card
10) Confirmative certificate
11) Safety video
3.2 Assemble Robin.
First: put the handlebar stem into the adapter and tighten it up with 4 screws as follows,
Second: put the handlebar grip into the adapter of the handlebar stem and tighten it up with
4 screws as follows,
Third: press the power-open button behind Robin body of Robin to turn it on.
 Please make sure that the power is off when
you conducting any maintenance or installation
of Robin.