Instructions

5858

www.cel-robox.com

5.0 AutoMaker Soware

5.5.3 Print Settings

This allows you to adjust the quality and print profile for production.

1 Quality Setting 4 Fill Density

2 Custom Print Profile 5 Support Material Setting

3 Profile Summary 6 Brim Width

• Quality Setting

This allows you to select a basic quality setting from the list of options - Dra,

Normal or Fine. The final option - Custom allows you to create a new profile

or to select from a previously created one. To create a new profile, click the

selection box and choose Create New... - this will expand the Advanced Tray

to the right (see section 5.5.5).

• Profile Summary

This displays a brief summary of the currently selected print settings. The

information available is as follows:

• Layer Height in microns (µm).

• Perimeters use - which nozzle is used to print the outside surface of the

object.

• Infills use - which nozzle is used to print the inside fill of the object.