Instructions

4646
www.cel-robox.com
5.0 AutoMaker Soware
Each Robox® connected to AutoMaker™ has its own icon which displays the
name and current status of the printer, as well as an indicator which shows the
progress of the current print (if available).
The status icons can be summarised as follows:
• Ready - When Robox® is available and ready to print.
• Printing - When Robox® is currently printing an object.
• Paused - When Robox® has been paused during a print.
• Notification - When a message is available in the printer status.
• Error - When Robox® has a problem which must be resolved before
continuing.
5.3.2 Installed Filament
AutoMaker™ will automatically recognise the material installed on the reel using
data stored on a chip inside the reel. Depending on the type of filament on the
reel, they are displayed in dierent ways, as shown below:
Chroma Green
™
110m / 372g remaining
1: PLA
Robox® SmartReel™
This will be displayed as a reel symbol.
Generic/Custom 1
50m / 125g remaining
1: ABS
Generic/Custom Material
This will be displayed as a gear symbol.
Unrecognised Reel
Not Available
1: ERROR
Unrecognised/Unformatted Reel
This will be displayed as a crossed circle.
Some of this information is also displayed in the ‘Current Printer Status’ area of
the screen, where the reel is shown installed on the le of the printer.
5.3.3 Temperature Display
This area of screen displays a historical graph of the bed, nozzle(s) and ambient
temperature over time.