Manual

CHAPTER 1
Introduction
This guide explains how to use the FlowBotics Studio SSC32 Servo Sequencer project.
If you have not already done so you'll need to read the FlowBotics Studio user guide and be familiar
with how to launch the SSC32 Servo Sequencer project from the FlowBotics Studio Project Browser.
The FlowBotics Studio user guide is available from the Help button in FlowBotics Studio.
If you need information on how to assemble your robotics kit you can find it here:
http://www.lynxmotion.com/s-2-assembly-guides.aspx
- 4 -