Manual

OVERVIEW
Console
You can talk directly to the SSC-32 using the Console. To access this click on the Console toggle
button which is above the help button to the left of the sequencer.
The console will pop open. You can click here and type commands. Click the Send button to to send
the commands to the board. Any returned data is shown below the command input box.
Please refer to the SSC32 user manuals to find out more about supported commands.
Firmware Update
The software allows you to update the SSC32 firmware. First connect to the board then press the
Firmware button (shown below).
You will be asked to provide the software with a firmware file (ending .abl). After the update is complete
you will need to power off the board, then power it on again and re-connect.
- 11 -