User Guide


Thename“DFRobotShopRoverisnotnecessary;youcannameitwhateveryouwant.
SpecifytheCOMport(USB)thatisconnectedtotheDFRobotShopRover.Ifyouareusing
XBee,BluetoothorRF,selecttheCOMportconnectedtotheBluetoothdongle/XBeebreakout/
RFTransmitter(USB).

NoconfigurationisneededfortheDFRobotBluetoothModule–simplyconnecttoitinyour
BluetoothapplicationandthemoduleinstalledontheDFRobotShopRoverwillbepickedup
(assumingitispowered).

TousetheXBeemodules,installoneontheUSBtoXBeebreakoutboardinthesame
orientationasindicatedontheboard,andconnecttheboardviaUSBtoyourcomputer.The
boardshouldbepickedupasastandardCOMport.InstalltheotherXBeemoduleontheXBee
shieldandinstalltheshieldontheboardensuringtheTx/RxpinsoftheshieldlineupwithRx/Tx
pinsontheDFRobotShopPCB.

MoreinformationabouttheXBeeshieldcanbefoundonwww.arduino.cc.

RobotShopInc.www.RobotShop.com
