Assembly Manual

RobotShop
M100RAK V3 - Assembly Guide
3-ArmAssembly
3.1-ArmAssembly(Step1)
● 1x - Gearbox Assembly (Base)
● 1x - Gearbox Assembly (Shoulder)
● 1x - Aluminum Hub Spacer (⅜ thick) - P/N 545380
● 4x - 6-32 x ⅝ ” (0.625”) socket head screws
This step is a little tricky as you will need to work in a tight space. You have to assemble the two gearbox assemblies
forming the arm base. Using four 6-32 x ⅝” screws, join shoulder assembly with the base assembly together with the
hub spacer in between as shown in the pictures.
RobotShop
P.7