Assembly Manual

RobotShop
M100RAK V3 - Assembly Guide
1.2-ServoAssemblyB
● 1x - HS-785HB Servo (horn can be left in place or removed)
● 1x - Aluminum raised servo Box
● 4x - 6-32 x ⅜” (0.375”) socket head screws
The servo will be inserted from underneath and needs to be secured by four 6-62 x ⅜” screws. Do not tighten the
screws all the way to allow you adjust the gear meshing later on.
RobotShop
P.3