Manual

Compatibility
Universal Connection Point
The universal connection point incorporates the standard servo horn hole pattern used on Lynxmotion servo
erector set brackets. These brackets are ideal for mounting a pan / tilt system to the rover (or a pan and tilt or
just a tilt) or for mounting your own custom hardware. We suggest using micro sized servo brackets to reduce
weight, though standard sized servo brackets can also be used. Giant scale servos are not suggested simply due
to weight imbalance.
The Lynxmotion Aluminum multi-purpose sensor housing can be used to easily mount a Sharp infrared sensor
or ultrasonic sensor to the front of the rover. The Robotics Connection Sharp IR Turret allows you to mount
three such sensors.
To mount a gripper to the front of the robot, we suggest the following products:
• 1x RB-Lyn-83 Lynxmotion Aluminum L Connector Bracket Pair (or RB-Lyn-106)
• 1x RB-Lyn-76 Lynxmotion Little Grip (no servos)
• 1x RB-Lyn-118 Lynxmotion Little Grip Attachment Kit
• 1x RB-Hit-27 Hitec HS422 Servo Motor (standard)
Note: you will need to add weight to the rear of the robot to offset the weight of the gripper.