Manual

V2.0 Board
V1.5 board with following modifications:
Arduino Uno design w/ ATMega8 USB to serial
L298P Motor Controller & redesign
2x XBee headers w/ switch & Breakout pins
Solder prototyping area (previously cargo area)
Additional mounting holes
Added additional front mounting slots
V2.0 Basic Kit
1x V2.0 PCB + 1x Hardware Bag
1x Tamiya Twin Motor Gearbox
1x Tamiya Tank Track Kit
2x Rover frame (left and right)
1x 4xAA battery holder
V2.0 Bluetooth Kit
1x V2.0 Basic Kit
1x Bluetooth module
1x USB cable
1x 3.7V, 1000mAH LiPo battery
V2.0 XBee Kit
1x V2.0 Basic Kit
2x Xbee modules
1x USB to Xbee breakout
1x USB cable
1x 3.7V, 1000mAH LiPo battery
V2.0 Mecanum Kit
V2.0 board + 2x Hardware bags
2x Rover frame (left and right)
2x Tamiya Twin Motor Gearboxes
1x Mecanum Wheel set
1x DFRobotShop Rover Motor Controller Shield
4x Encoders for Tamiya Twin Motor Gearbox
1x 4xAA battery holder
V2.0 Omniwheel Kit (40mm)
V2.0 DFRobotShop Rover PCB + 2x Hardware bags
2x Rover frame (left and right)
2x Omniwheel Brackets
4x 40mm Omniwheels
1x DFRobotShop Rover Motor Controller Shield
4x 6V, 180rpm DC gear motors