Manual

Versions & Kits
Several versions of the DFRobotShop Rover have been released:
V1.0 Board (discontinued)
Arduino Duemilanove Design w/FTDI USB to Serial
LEDs connected to pin 13, Tx, Rx and PWR
Temperature and Light sensors connected to A0 and A1 (via jumpers)
DFRobot BT / APC220 Interface
Onboard voltage regulator
On/Off switch
L298 motor Controller
2x Screw terminals for motors
Blank area for cargo
V1.0 Basic Kit (discontinued)
V1.0 Board
Tamiya Twin Motor Gearbox
Tamiya Tank Track Kit
2x Metal Brackets
V1.0 Hardware Bag
4xAA battery holder
V1.0 Bluetooth Kit (discontinued)
V1.0 Basic Kit
DFRobot Bluetooth Module
USB Bluetooth Module
3.7V, 1000mAH LiPo battery
Seeedstudio LiPo shield
V1.0 XBee Kit (discontinued)
Basic V1.0 Kit
2x XBee series 1 modules
USB to XBee breakout board
3.7V, 1000mAH LiPo battery
Seeedstudio LiPo shield