Manual

Power
The yellow 6V DC gear motor from DFRobot operates at a nominal 6V, but can easily be powered from 4.8V to
7.4V. The higher the voltage, the faster the motor will turn. We suggest using the 7.4V, 2200mAh LiPo battery,
though its important to note that the DFRobotShop Rovers onboard LiPo charger can only charge 3.7V LiPo
batteries. Alternatively, you can use the 4xAA battery pack with 4x reachargeable or 4x Alkaline batteries. The
3.7V LiPo works, but the robot is quite slow.
Continuous Rotation Servo: The Hitec 1425CR is a standard continuous rotation servo meant to be powered at
between 4.8V to 6V. LiPo batteries are therefore NOT suggested. You can use a voltage regulator circuit to
reduce the voltage from 7.4V to 6V, though such a product is not included in any of the kits and must be
purchased separately.