User's Guide

WR-3700 Series User’s Guide
3
Installation
The WiNRADiO internal version package contains the following items:
WiNRADiO receiver card
The WiNRADiO external version package contains the following items:
WiNRADiO receiver unit
RS-232 cable
Power adaptor
PC Card Adaptor option (if ordered)
Portable Power Source option (if ordered)
Both packages include the following items:
WiNRADiO software installation disk
Indoor test antenna
This User’s Guide
The manufacturer’s warranty information
Any software option (such as the WiNRADiO Digital Suite or Database Manager), if
ordered
Note that you must supply your own antenna for optimum reception.
In order for your WiNRADiO receiver to function, your IBM PC compatible computer must
meet the minimum system requirements specified below.
System Requirements
Minimum Recommended
Processor: 386 Pentium or higher
RAM: 4 MB 16 MB or more
Display VGA SVGA: at least 800x600, 256 colours
OS: Windows 3.1 Windows 95, 98 or NT 4
Spare serial port or PCMCIA socket for the external model, or a spare ISA slot for the
internal model.
3700i Hardware Installation
1. If your computer is on, shut down the computer first, turn it off and disconnect the
power cord.
2. Remove the computer cover.
3. If other expansion cards are fitted, check their address assignments. If necessary, change
any of the jumpers on the WiNRADiO receiver card to avoid conflicts. (The default I/O
port 180, IRQ 10 and DMA 0 should normally work, however if you need to change any
jumpers, see the following section about ‘Jumper Settings’.)
4. Choose an empty 16-bit expansion slot, preferably with an empty slot immediately to
the right (assuming you are facing the computer front).
5. Important: Before inserting the WiNRADiO card, touch the computer metalwork with
your hand (to drain any static charge from your body), and also touch the metal bracket
on the WiNRADiO card.