User's Manual

- 25 -
• Most stations have a name or callsign. You can store up to 11
characters in the
Callsign
field.
• For quick tuning to your favorite stations, you can assign
Hotkeys
(function keys F2 to F12) to up to eleven different
frequencies. If you then press a hotkey, the associated
frequency will be instantly recalled. Hotkeys which are already
assigned will be shown in this dialog box as ‘used’, however
you can overwrite the previous assignment with a new one if
you wish.
• User
Comments
can also be stored with a frequency. The size
of the comments is limited to 31 characters.
• The
Mode
and the
Squelch
values can also be stored, which
will be then set automatically when the frequency is recalled.
• Finally, a
Memory Scan Lock-out
can be set for each
memory, which means that the memory will not be included in a
memory scan. In the memory Recall window, such memories
will be shown with a small ‘x’ preceding the memory number.
Finally, when everything has been set, click on
OK
or press
Enter,
to save
the new frequency.
Recalling a Frequency from Memory
There are several ways to recall a frequency from memory:
• Using Memory Recall
• Typing a number into the memory number display
• Using a hotkey
• Memory stepping
To recall a frequency, click on the
R
button. A dialog box will pop up
showing a list of all memory frequencies.
To select a frequency, click on an item in the list, and the frequency will be
tuned. Then close the window. Alternatively, use the
up/down
cursor keys
to choose the frequency and press
Enter
.