User's Manual
Table Of Contents
- Table of Contents
- Introduction
- The Hardware
- Installation
- Getting Started
- Inside the Excelsior
- Resizing the Application Window
- Drop-Down Menu Controls
- Tuning the Excelsior
- Receiver Selection
- Mode Selection
- Function Tabs
- Spectrum Scopes
- Recording Functions
- Attenuator
- Preamplifier
- S-meter
- Top Menu Bar
- File
- Options
- Auto-mute RX not in focus
- Enable second RX
- Filter Length
- Front Panel LED
- Display Offset
- Time
- Keyboard Shortcuts
- VSC Set-up
- Audio Buffering
- AMS Capture Range
- Audio Output
- Show Measurements
- Show Data Rates
- Of particular interest to many users will be the CPU load (excessive CPU load may cause sluggish behaviour or freezing of the computer), and Audio latency. Apart from DDC bandwidth, CPU load may be minimized by reducing the Demodulator filter length (...
- Note: When measuring sensitivity using SINAD, it is very important that the Audio Filter is enabled and the cut-off frequencies (and for FM measurements, also the de-emphasis) are set according to the specified test conditions. Proper audio filtering ...
- Show Waterfall Timestamps
- Calibration
- Hand-Off Receiver
- Color scheme
- Restore factory defaults
- Memory
- Scheduler
- Scanner
- Logger
- Plugins
- Power Switch
- Date and Time Display
- Appendix A – SDR and DDC Primer
- Appendix B – Troubleshooting
- Appendix C – USB Interface Diagnostics
- Appendix D – Dealing with Interference
- Appendix E – G39DDCi PCIe Card Connections
- Appendix F – Waterfall Spectrum Palettes
- Appendix G – Recording File Formats
- Appendix H – Compliance Declarations
- Appendix I – Safety Disposal
WiNRADiO G39DDC User’s Guide
93
Display Offset
This feature makes it possible to introduce a fixed offset to the displayed
frequency. It is particularly useful if an external frequency down-converter is
being used with the receiver:
Enter the required offset value in the Display offset edit box, click OK, and this
value will be added to the displayed frequency.
Optionally, you can also invert the displayed spectrum using the Invert
spectrum checkbox, which may be useful for example if a spectrum-inverting
down-converter is used at the input.
Time
The time information displayed in the top menu bar can be either the local time
(as provided by the PC) or UTC (Co-ordinated Universal Time). This can be
selected by the user using this option.
It is also possible to select 12 or 24 hour time display format, or the default
format determined by the Windows “locale” settings.
We are open 24/7!
With despatch centers located in the US, UK, EU and Australia, no matter what the
time of the day is, the WiNRADiO direct online one-stop-shop for receivers, software,
antennas and accessories never closes. Check this out at
www.winradio.com/shop.