User Manual

- 47 -
Note: If you have difficulties accessing the sound card control panels (for
example if there is no speaker icon), refer to Appendix B – Sound Card
Controls.
• The receiver demodulator has not been set up properly. Make sure that
the sound card type and the audio input are properly selected (this panel
is accessible under the Setup button in the demodulator panel):
• The sound card has the left and right inputs reversed. Normally, the
G303 Demodulator expects the receiver to be connected to the Right
input. Using the reverse input makes the demodulator use the Left input
instead. (This is a very rare problem, so use this only when all other
possible remedies have been explored.)
• Make sure the squelch is not activated.