Data Sheet

4/27/2018 OpenCR1.0

http://emanual.robotis.com/docs/en/parts/controller/opencr10/ 22/50

6. 2. 3. 3. Port setting

This step shows the port setting for the program uploads. The OpenCR should be

connected to the PC and the OpenCR via the USB ports.

Select Tools → Port → /dev/cu.usbmodem1411

Caution The value of /dev/cu.usbmodem1411 may be different depending on the environment

connected to the PC.

6. 2. 4. Writing Bootloader(Mac)

OpenCR1.0