Manualshelf

Data Sheet

ManualsBrandsRobotis ManualsRobot ManipulatorsRobotis Manipulator-H 6DOF Robotic Arm
31323334353637383940
36
To setup and run ArmMonitor02 follow the same procedure as in
ArmMonitor01.
As in ArmMonitor01 you will be asked to enter COM port number and baud
rate. You should also see “Succeed to open USB2Dynamixel” followed by “Press
any key to move first pose.” The arm moves to its initial pose.
The photo below is the arm in its “arrival” pose.