User manual

BIGMOW
Configuring the
BIGMOW
BIGMOW
:
: Keyboard
Using the keyboard.
Control panel
Belrobotics
Shutdown
Info
Statistics
History
Version
serial
Settings
Options
Clock
New code
Language
See debug
‘*’ + ‘ _ _ _ _’ user code
Menu structure :
: Shortcut to menu « Options »
: # Up, « Stats »
: $ Down, « See debug »
: Ä Select
: Enter code
: Return to previous menu option
… : Number entries
Keys
PAGE 17
The keyboard is under the rear cover. Open the
cover. The keyboard consists of 16 keys and
one operation key.
There are 10 numerals and 6 action keys: 'F1'
isa short cut to the menu «Options »; 'F2’ and
‘F3’ for scrolling up/down the various sub-
menus or to select an action in a menu; ‘#’to
select the chosen action; ‘’to enter the code
and ‘C’ to go back to the previous menu or to
delete.
Prior to closing the cover, the user must always
press . The screen will flash for the Big-
mow to start up again.
Functions.
In the “Belrobotics” menu, there are 3
sub-menus:
• The “stop” menu to put the Bigmow;
• The “data” menu for all information on the
operation of your Bigmow;
• The “settings” menu to access the user
parameters.
Selecting ‘*’ allows the user code to be en-
tered and the machine to be activated for
one month. After this period, the machine
will stop and the code will have to be re-
entered. Prior to a long absence, the code
must be entered; the Bigmow will thus be
activated for 1 month. Without this code, the
machine will not function.