Specifications

microBus-Cam II

1.0 Mechanical Installation

1. Mount the support bracket to the bulkhead or ceiling of the vehicle, using the

sheet-metal screws (provided). Position the bracket at the horizontal center of

the vehicle. If the bracket is to be bulkhead-mounted, then position the bracket

as high as possible on the bulkhead. If the bracket is being mounted to the

ceiling, then mount the bracket as far forward as possible. These mounting

practices will provide optimal sight-lines.

2. Mount the microBus-Cam II

unit to the support bracket with the two 8-32

machine screws (provided). Ensure that the Camera Lens is to the left, as

viewed from the front.