Specifications

microBus-Cam II
14.0 Working with Clips--The SD Card
The recorded video clips are stored on a totally solid-state SD (Secure Digital) Card. The
microBus-Cam II® can accept SD Cards with capacities up to 32 GB.
Most users prefer to use a computer to view their clips. It is more convenient than on-
vehicle viewing— just remove the card and plug it into the SD Card reader on your
computer. Most recent computers have such readers already built in, but if yours does
not, a very inexpensive reader can be purchased at your local computer store (or us). The
readers use the computer's USB 2.0 port to adapt to the SD Card.
Important:
Before proceeding with SD Card removal , stop all recording by pressing the
'STOP' button on the Remote Control, and wait for the green record light to go
off. Failure to stop recording before removing the SD Card can corrupt it.
To remove the SD Card from the microBus-Cam II®, use the provided key to disengage
the lock next to the card, then swing the SD Card cover away from the opening..
Next, push the SD Card toward the unit, then release it--the card will disengage.
Reverse the procedure to install a new card.
Note:
Make sure that your computer has the latest video codecs installed. Free codecs are available
for download at www.divx.com. They also have some excellent video players at a nominal
cost, but the standard Windows Media Player is perfectly capable of playing clips from the
microBus-Cam II®
(with the proper codecs, of course).
High-quality video playback of any kind requires a good-quality video graphics card and USB
2.0 port on your computer.
21