Datasheet
2 SIM23xx Motor Controller Datasheet Version 1.0 November 4, 2020
• Up to 8 Pulse Length, Duty Cycle or Frequency Inputs
for use as command and/or feedback
• Up to 10 Digital Inputs for use as Deadman Switch,
Limit Switch, Emergency stop or user inputs
• Inputs for up to two Quadrature Encoders
• 4 general purpose 24V, 1.5A output for brake release or
accessories
• Selectable min/max, center and deadband in Pulse and
Analog modes
• Selectable exponentiation factors for each command
inputs
• Trigger action if Analog, Pulse or Hall counter capture
are outside user selectable range (soft limit switches)
• Built-in Battery Voltage and Temperature sensors
• Optional 12V backup power input for powering safely the
controller if the main motor batteries are discharged
• Power Control input for turning On or Off the controller
from external microcomputer or switch
• No consumption by output stage when motors
stopped
• Regulated 5V output for powering RC radio, RF
Modem, sensors or microcomputer
• Separate Programmable acceleration and deceleration
for each motor
• Ultra-efficient 3.3 mOhm ON resistance MOSFETs
(1.65 mOhm on Single Channel)
• Stall detection and selectable triggered action if Amps
is outside user-selected range
• Short circuit protection
• Overvoltage and Undervoltage protection
• Watchdog for automatic motor shutdown in case of
command loss
• Overtemperature protection
• Diagnostic LED
• ABS plastic enclosure with heat conducting bottom
plate
• Efficient heat sinking. Operates without a fan in most
applications.
• Dustproof and weather resistant. IP 40 rating
• Power wiring using screw terminals
• 4.8” (123.0mm) L, 3.3” W (83.0mm), 1.0” (25mm) H
• – 40º to +85º C operating environment
• Weight: 0.47 lbs (215g)
• Easy configuration, tuning and monitor using provided
PC utility
• Field upgradeable software for installing latest features
via the Internet
Specifications and Listings
Controller is designed and built to comply with UL and IEC specifications and standards, but is approved only
under the mentioned standards on this datasheet.
Orderable Product References
Reference Number of Channels Amps/Channel Volts STO
SIM2360 2 30 60 No
SIM2360S 1 60 60 No
SIM2360T 2 30 60 Ye s
SIM2360TS 1 60 60 No