Data Sheet

BMS10x0
www.roboteq.com 3
System Architecture
The BMS10x0 uses an ultra-low power consumption, 32-bit Processor to monitor
voltages, amperage and temperature (shown as V, A and T, as seen in the diagram in
Figure 1, below) to control the internal balancing array and solid-state switches. The
balancing array is designed to extract charge from multiple higher voltage cells during the
charge cycle and smoothing the uneven stresses on the battery. A power management
block ensures that any system or subsystem is turned off when not needed. This results
in the lowest possible power consumption in order to keep the battery from needlessly
discharging when not used.
FIGURE 1. Balancing and Switches