Data Sheet

BMS10x0
2 www.roboteq.com Version 1.0 March 2, 2018
Ordering References
Part Number Number of Cells Max Voltage Bluetooth
BMS1040 6 - 10 40 No
BMS1040BT 6 - 10 40 Ye s
BMS1060 11 - 15 60 No
BMS1060BT 11 - 15 60 Ye s
• Centralized design. No cell boards – All BMS electron-
ics contained within the unit
• 100A max current to load. 200A peak
• Automatic, intelligent cell voltage balancing during charge
• Advanced State of Charge monitoring and manage-
ment for optimal battery life
• State of Health monitoring and reporting
• Built-in bi-directional current sensors for monitoring flow
from/to battery pack, load and charger.
• Built in temperature sensor. Connector for up to three
external temperature sensors
• Built-in 100A switch with under voltage and overvoltage
shutoff
• A built-in circuit breaker function in case of short circuit
and continuous overload
• Separate independent input and internal switches for charger
• Connection to optional brake resistor, heater or to other
high current accessory
• Two 1A Digital Output for activating Fan, Cooling Circuit,
Contactor or to another low current device
• CANbus, RS485, or PWM Output for communication of
battery data and system status
• Optional Bluetooth transceiver for Battery Monitoring
via Smartphone or PC Utility
• LED indicators for status and battery charge indication
• High current screw terminals to battery and load
• Automotive grade, locking connectors to battery cells
and to the I/O
• Built in clock/calendar for data logging time stamp
• Built-in programming language for scripting advanced
power management strategies
• Direct, one-wire interface with RoboteQ motor
controllers
• USB connector and PC Utility for setup, testing and
monitoring
• Ultra-Low power consumption. Will not drain batteries
during storage and stand-by
• Aluminum bottom plate for conduction cooling with
ABS cover
• Field upgradeable firmware
• Dimensions: L:139mm x W:113mm x H:29mm
• Weight: 250g