Data Sheet

System Requirements
Advanced Digital Motor Controller User Manual 363
SECTION 20
Using the
Roborun
Configuration
Utility
A PC-based Configuration Utility is available, free of charge, from Roboteq. This program
makes configuring and operating the controller much more intuitive by using pull-down
menus, buttons and sliders. The utility can also be used to update the controller’s software
in the field as described in “Updating the Controller’s Firmware” on page 241.
System Requirements
To run the utility, the following is needed:
• PC compatible computer running any recent version of Windows
• A USB connector for controllers with USB connectivity
• If communicating with the controller via RS232, an unused serial communication
port on the computer with a 9-pin, female connector for controllers using RS232
communication
• An Internet connection for downloading the latest version of the Roborun Utility or
the Controller’s Firmware
If the PC is not equipped with an RS232 serial port, one may be added using a USB to
RS232 converter.
Downloading and Installing the Utility
The Configuration Utility must be obtained from the Support page on Roboteq’s web site
at www.roboteq.com.
• Download the program and run the file setup.exe inside the Roborun Setup folder
• Follow the instructions displayed on the screen