Data Sheet

2 FDC3260 Motor Controller Datasheet Version 1.0. December 19, 2014
• PID control loop
• Built-in Battery Voltage and Temperature sensors
• Optional backup power input for powering safely the
controller if the main motor batteries are discharged
• Power Control wire for turning On or Off the controller
from external microcomputer or switch
• No consumption by output stage when motors stopped
• Regulated 5V output for powering RC radio, RF Modem,
sensors or microcomputer
• Separate Programmable acceleration and deceleration
for each motor
• Ultra-efficient 2.0 mOhm ON resistance MOSFETs
• Selectable triggered action if Amps is outside user-
selected range
• Short circuit protection
• Overvoltage and Undervoltage protection
• Watchdog for automatic motor shutdown in case of
command loss
• Overtemperature protection
• Diagnostic LED
• ABS plastic enclosure with heat conducting bottom plate
• Efficient heat sinking. Operates without a fan in most
applications.
• Dustproof and weather resistant. IP51 NEMA rating
• Power wiring 0.25" Faston tabs
• 5.5” (139.7mm) L, 5.5” W (139.7mm), 1.0” (25mm) H
• -40o to +85o C operating environment
• 0.5 lbs (250g)
• Easy configuration, tuning and monitory using provided
PC utility
• Field upgradeable software for installing latest features
via the internet
Orderable Product References
Reference Number of Channels Amps/Channel Volts
FDC3260 360 60