User`s manual

The AX2550 controller is delivered complete with the hard-
ware, cables, and software necessary for its operation. The
controller’s factory default settings will satisfy the most
common robot designs so that it can be installed and oper-
ated within minutes of unpacking. The controller is
supported by a detailed and illustrated User’s
Manual, including a 10-page Quick Start section and
over 150 pages of Reference Information.
Package Content
● AX2550 controller fitted with power cables
● R/C radio adapter cable
● Serial Communication cable
● Quickstart Manual
● CD containing PC Configuration Software, and com-
plete User’s Manual.
AX2550 Dual Channel Forward/Reverse Speed controller up to 40V and 120A SmartAmps per channel
ready to
out of the box
work right
sturdy and
construction
The AX2550 is built into a extruded aluminum case which
also serves as a heat sink for its electronics. The large fin
area ensures sufficient heat dissipation for operation
without a fan in most applications.
Mounting brackets on each end are provided for durable
assembly of the controller onto any robot chassis.
Optional shock mount absorbers may be added for use in
the most brutal environment.
The 15-pin connector includes mounting nuts to secure a
permanent connection with the radio receiver or micro-
computer and the various external sensors.
At 2lbs (900g), the AX2550 is the most compact and
lightweight motor controller in its class.
Program Set Reset
5.50" (140 mm)
4.00" (102 mm)
1.60"
(40 mm)
lightweight
Partial references listing only. Order on-line at www.roboteq.com or from your local distributor
0.25"
(6.3 mm)
7.00" (178 mm)
5.50" (140 mm) 4.00" (102 mm)
3.00" (76 mm)
8.00" (203 mm)
9.00" (228.5 mm)
Ordering References