Owner's Manual

Roomba Combo™ i8 Owner’s Guide 2

Using Your Roomba® Robot Vacuum

Positioning the Home Base™ Charging Station Charging

• Place the robot on the charging station to activate the battery.

Note: Your robot comes with a partial charge, but we recommend that

you charge the robot for 3 hours prior to starting the first cleaning job.

• If the “CLEAN” text is pulsing while charging, the robot is in the middle of a

cleaning job and will automatically resume where it left.off once recharged.

• The robot uses a small amount of power whenever it is on the charging

station. You can put the robot in a further-reduced power state when not in

use. For instructions and more details on this Reduced Power Standby Mode,

refer to the iRobot HOME App.

• For long-term storage, turn off the robot by removing it from the charging

station and holding down

for 10 seconds. Store the robot in a cool, dry

place.

• Follow the step-by-step instructions to set up your Roomba.

• Set up PrecisionVision Navigation to avoid obstacles in real time.

• Set an automatic cleaning schedule and customise cleaning preferences.

• Create smart maps to tell your robot where and when to clean.

Download the iRobot Home App and Connect to Wi

Good Wi-Fi

Coverage

*Objects are not to scale.

4 ft. (1.2 m)

from stairs

4 ft.(1.2 m)

in front

1.5 ft. (0.5 m)

both sides

WARNING: To prevent the risk of your robot falling downstairs, ensure that

the charging station is placed at least 4 feet (1.2 meters) away from stairs.

White Light Ring While Charging

Solid White: fully charged

Pulsing White: charging.