Datasheet

• Limit switch inputs to stop motion in one direction when closed. Motion is
allowed in the other direction.
• Indicator LED for speed and direction of motor
• Status LED status information and mode indications
• Receiver battery eliminator circuit (BEC) standard – may be disabled. This
can provide up to 100 mA of current at 5V to the RC receiver and other
attached electronic circuits. (Must be de-rated for input voltage above 16V)
• Failsafe shuts off motor if R/C signal is lost
• FLASH-based microcontroller with upgradeable software via in-circuit
programming header
• Ceramic oscillator (crystal) for stable operation at all temperatures
• Optional 4 position screw terminal may be user soldered to top or bottom of
PCB for easy removal of battery and motor wires
• Capable of supporting I2C or serial command streams. Not supported by
stock R/C software but user may replace the stock code if desired. Contact
us if you would like to discuss custom software for your application.