Operation Manual

-P24-- P23-
3. INSTALLATION
3.5 Virtual wire and charging
station connecting
- Connect two ends of virtual wire to
patch jack (virtual wire terminal
located on charging station)
randomly, there is no positive and
negative.
- Redundant virtual wire must be cut.
3.6 Power connection
1. Insert charger to the station.
2. Connect charger with power
supplier.
220V/110V
power supplier
WARNI NG
The cha rge r is not wat er -proo f the refor e it mus t be loc ated on
a plac e whi ch is dry an d ven tilat ed.
4.1 Remote control
1
9
2
3
4
5
6
7
8
4. REMOTE CONTROL
To stop the mower. Press it, the
mower enters taskstate.
Indicator light.
Go right.
Effected while mower in taskstate.
User has to stop the mower first,
then press it, the mower enters
MANUAL pattern.
Effected while mower in taskstate.
User has to stop the mower first,
then press it, the mower enters
AUTO pattern.
Go left.
Speed up
Press it during mower is working,
it goes back to charging station.
Turn ON/OFF blade.
1
2
3
4
5
6
7
8
9
IMPORTANT INFORMATION
These Three buttons only effected in MANUAL pattern.
3
33
8
9