• R 401 Series A • R 402 Series A • R 402 V. Series A Robot-coupe USA. Inc. P.O. Box 16625, Jackson, MS 39236-6625 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com - website: www.robotcoupeusa.
IMPORTANT WARNING W A R N I N G KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you know your appliance and enable you to use the equipment correctly.
WARRANTY ENGLISH CONTENTS OPTIONS • Coarse serrated blade IMPORTANT WARNING INTRODUCTION TO YOUR NEW R 401 Series A • R 402 Series A • R 402 V.
ROBOT COUPE U.S.A., INC. LIMITED WARRANTY YOUR NEW ROBOT COUPE PRODUCT IS WARRANTED TO THE ORIGINAL PURCHASER FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE. This LIMITED WARRANTY is against defects in the material and/or workmanship, and includes labor for replacement of defective parts, provided repairs are performed by an authorized service agency (see attached list).
KEEP THESE INSTRUCTIONS IN A SAFE PLACE ENGLISH IMPORTANT WARNING W A R N I N G WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you know your appliance and enable you to use the equipment correctly.
INTRODUCTION TO YOUR NEW R 401 Series A • R 402 Series A • R 402 V. Series A BOWL CUTTER / VEGETABLE PREPARATION ATTACHMENT 6 The food processor is perfectly geared to your professional needs. It can perform any number of tasks to meet all your professional needs. The R 401 Series A - R 402 Series A - R 402 V Series A consists of a cutter bowl and a vegetable preparation attachment.
1) The vegetable preparation attachment consists of two detachable parts : the continuous feed attachment and the continuous feed lead. 2) With the motor base facing you, fit the continuous feed attachment onto the motor base; the exit chute should be on your right. Turn the attachment back to the right (counterclockwise) until it comes to a stop locked in place on the motor base tabs. 4) Place the cutting plate of your choice onto the discharge plate.
For the R 401 Series A - R 402 Series A R 402 V Series A models : 5) Place the continuous feed lead onto the continuous feed attachment, and rotate it back counterclockwise until it is aligned with the continuous feed attachment. USES Max processing Quantity (in lb) Processing time (in mn) • 1- 4 QUART BOWL MACHINES ONLY: CHOP • MEAT OPERATION THE UNIT SHOULD BE OFF EXCEPT WHEN PROCESSING IS UNDERWAY. It is recommended that the machine be operated on a 50% duty cycle.
A coarse serrated blade is available as an option and is mainly intended for kneading and grinding.
MAINTENANCE • DIMENSIONS (in inches) • MOTOR SEAL W A R N I N G The blades and cutting plates are extremely sharp. Handle with care. E An examination should be made periodically to assure that a seal against liquids is being maintained around the motor shaft. The seal can and should be replaced whenever wear or erosion is noted or minimally once ever y three to six months. It is recommended that the seal be replaced by an authorized repair agency. When you open the bowl lid, the motor stops.
TECHNICAL DATA DATOS TECNICOS DONNÉES TECHNIQUES 27
28
29
30
31
32
33
34
35
36
37
P.O. Box 16625, Jackson, MS 39236-6625 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com website: www.robotcoupeusa.com Phone : 1-800-824-1646 Réf. : 405 526 - 10/2009 - R 401 Series A • R 402 Series A - R 402V Series A - USA Robot-coupe USA. Inc.
