R 2 Dice R 2 Ultra Dice Robot-coupe USA. Inc. P.O. Box 16625, Jackson, MS 39236-6625 - 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com - website: www.robotcoupeusa.
WARRANTY ENGLISH SUMMARY OPERATING INSTRUCTIONS • Bowl attachment IMPORTANT WARNING • Vegetable preparation attachment CLEANING INTRODUCTION TO YOUR NEW R 2 Dice • R 2 Ultra Dice BOWL CUTTER / VEGETABLE PREPARATION • Motor base • Attachments MAINTENANCE • Motor seal SWITCHING ON THE MACHINE • Advice on electrical connections • Control panel • Blade • Blades, plates and grids • Bowl locking washer SAFETY ASSEMBLY • Bowl attachment • Vegetable preparation attachment TECHNICAL DATA • Exploded views
ROBOT COUPE U.S.A., INC. LIMITED WARRANTY YOUR NEW ROBOT COUPE PRODUCT IS WARRANTED TO THE ORIGINAL PURCHASER FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE. This LIMITED WARRANTY is against defects in the material and/or workmanship, and includes labor for replacement of defective parts, provided repairs are performed by an authorized service agency (see attached list).
KEEP THESE INSTRUCTIONS IN A SAFE PLACE ENGLISH IMPORTANT WARNING W A R N I N G WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly.
INTRODUCTION TO YOUR NEW R 2 Dice • R 2 Ultra Dice The R 2 Dice / R 2 Ultra Dice is a versatile machine designed to meet your professional needs. It can perform a number of tasks, as well as save much in time and labor. This food processor consists of a bowl assembly and a vegetable preparation attachment. The 3 quart bowl is used for chopping, grinding, pureeing, blending, mixing, and kneading ingredients used in most recipes.
USING A DICING ASSEMBLY : 5) Place the continuous feed lead onto the continuous feed attachment, and rotate it back to the right until it locks onto the bowl tabs. 4a) If you have chosen to dice, position the dicing grid in the continuous feed attachment. The grid can be positionned in only one way. The blades should be visible trough the feed lead opening. ENGLISH 2) Turn the attachment to the right until it locks onto the motor base tabs.
Pulse the machine until the desired result is reached. Then, if a puree or fine chop is desired, press the On button, and allow the machine to run until the product has the right consistency. USES Max.
Never immerse the motor base in water. Clean using a damp cloth or sponge. Cleaning of the motor base assembly must be done with care. First unplug the unit. A sponging with a cloth lightly dampened (not dripping) in a mild detergent is acceptable, making sure the water is not permitted to penetrate the shaft seal or around the switches and in the ventilation openings. Clean around the shaft seal with a small brush, taking care to remove all food. Do not forget to clean the motor shaft.
- Turn the blade over, and rub the stone flat against the underside of the blade to remove the feather edge formed at step 5. - Repeat the procedure for the other blade. - Wash the blade before use. • BLADES, PLATES AND GRIDS The blades on the slicing and julienne plates and the grids on the grating plates are all subject to wear and should be changed as required to ensure high quality cutting. • BOWL LOCKING WASHER The bowl locking washer is located below the bowl and holds the bowl in place.
28
29
30
31
33
P.O. Box 16625, Jackson, MS 39236-6625 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com website: www.robotcoupeusa.com Phone : 1-800-824-1646 Réf. : 450 159 Robot-coupe USA. Inc.
