Operating instructions

R100B Operation Manual
3
II. ASSEMBLY/DISASSEMBLY INSTRUCTIONS
Your Robot Coupe should be placed on a sturdy work surface at a comfortable working height and have a
standard 115 volt power outlet available. Always keep the machine unplugged during assembly and
disassembly.
Illustration #1
Become familiar with the part names as you
assemble the unit.
Always use caution and wear cut-resistant
gloves when handling the blade or the cutting
plates.
Always unplug the machine during assembly
and disassembly.
A. ASSEMBLY INSTRUCTIONS FOR USE WITH THE “S” BLADE
Illustration #2
1. Unplug the machine.
2. Press the off button.
3. Place the bowl on the motor base assembly with the safety
switch rod located just off center and to the left as you are facing
the front of the unit.
4. Then, turn the bowl back counterclockwise, locking it in place.
Illustration #3
5. Place the blade on the motor shaft. Rotate the blade until it
falls into place on the motor shaft. The bottom blade should be
just off and parallel with the bottom of the bowl.