OPERATION MANUAL FOR MODELS R100B & R100BCLR robot coupe U.S.A., Inc. P.O. Box 16625, Jackson, MS 39236-6625 280 South Perkins St., Ridgeland, MS 39157 email: robocoup@misnet.com website: www.robotcoupeusa.
R100B Operation Manual INTRODUCTION The Robot Coupe commercial food processor performs a host of culinary feats. It is designed for high speed and quality vegetable processing. The Robot Coupe slices, juliennes, and shreds with the continuous feed attachment, plus it will chop, grind, puree, mix, or knead using the cutter bowl attachment.
R100B Operation Manual II. ASSEMBLY/DISASSEMBLY INSTRUCTIONS Your Robot Coupe should be placed on a sturdy work surface at a comfortable working height and have a standard 115 volt power outlet available. Always keep the machine unplugged during assembly and disassembly. A. ASSEMBLY INSTRUCTIONS FOR USE WITH THE “S” BLADE Illustration #1 Become familiar with the part names as you assemble the unit. Always use caution and wear cut-resistant gloves when handling the blade or the cutting plates.
R100B Operation Manual Illustration #4 6. Press the off button in case the machine was left turned on. 7. Facing the front of the motor base assembly, place the lid on the bowl with the ramp turned off-center and to the left. 8. Turn the ramp back to the right until it locks in place over the safety switch rod. 9.
R100B Operation Manual III. OPERATING INSTRUCTIONS THE UNIT SHOULD BE OFF EXCEPT WHEN PROCESSING IS UNDERWAY. It is recommended that the machine be operated on a 50% duty cycle. This is easily accomplished since the preparation time (cleaning, coring, peeling, and loading) takes longer than the processing time. This will yield the longest life for your machine. A. INSTRUCTIONS FOR USE WITH THE “S” BLADE The “S” blade is used for grinding, pureeing, blending, mixing, of ingredients.
R100B Operation Manual Sharpening the “S” blade The “S” blade will require sharpening on a periodic basis depending on use. The use of a dull blade will sometimes give unsatisfactory results. A honing stone is provided with each machine for this purpose. Follow the directions shown to sharpen the blade, or have the blades sharpened professionally if you prefer. 1. Put on your cut-resistant gloves 2. Use the Robot Coupe stone or any good sharpening stone. 3.
R100B Operation Manual IV. CLEANING/PREVENTIVE MAINTENANCE Wear cut-resistant gloves when cleaning the blade to prevent cuts. (1) CLEANING: Proper cleaning of the machine is one of the most important preventive maintenance measures the user can employ. The high acid content of food can cause harm to the electrical parts contained within the housing. Although a seal isolates these elements from the outside, food juices will tend to seep.
R100B Operation Manual TROUBLE SHOOTING AIDS: The following sections indicate potential problems and the correct solution which should be implemented by the user. Problems which extend beyond these will require an experienced serviceman. A list of the authorized agencies is supplied. V. TROUBLE SHOOTING AIDS A. Unit does not start when assembled correctly 1. Pull plug and try another outlet. 2. Make sure the bowl and lid are in the proper position. B. Unit stops during processing 1.
Description SAFETY ROD ASSEMBLY FOOT BASE STRAIN RELIEF BOTTOM CUSHION BUSHING BAFFLE MOTOR FAN FOR MOTOR SAFETY SWITCH ASSEMBLY MOTOR SUPPORT SEAL SCREW (BASE) MOTOR SUPPORT SCREW SCREW COVER SCREEN KIT SMOOTH S-BLADE *SERRATED S-BLADE TOP BEARING MOTOR BASE ASSEMBLY BOTTOM BEARING SPRING *CLEAR BOWL Cutter Bowl Lid RUBBER O-RING CORD WITH PLUG *BOWL KIT, CLEAR *SHARPENING STONE LOUVER 8 AMP BREAKER RELAY CAPACITOR BLADE CAP 8/30/02 Part # 29900 R101 R102 R104 R106 R107 R110 R110.
U.S.A., Inc. P.O. Box 16625, Jackson, MS 39236-6625 280 South Perkins St., Ridgeland, MS 39157 email: robocoup@misnet.com website: www.robotcoupeusa.com 1-800-824-1646 ROBOT COUPE U.S.A., INC. LIMITED WARRANTY YOUR NEW ROBOT COUPE PRODUCT IS WARRANTED TO THE ORIGINAL PURCHASER FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE.
