• CMP 250 V.V. • CMP 300 V.V. • CMP 350 V.V. • CMP 400 V.V. • CMP 250 Combi Robot-coupe USA. Inc. P.O. Box 16625, Jackson, MS 39236-6625 - 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com - website: www.robotcoupeusa.
WARRANTY IMPORTANT WARNING • Unpacking • Storage • Power • Specifications • Dimensions • Safety features • Warning INTRODUCTION OPERATING THE POWER MIXER • Operation • Continuous operation • Variable speed operation • Mashed potatoes function WORKING POSITION • Mixer operation • Whisk operation ASSEMBLY/DISASSEMBLY - BLADE • Attaching the tube to the motor unit • Removing the tube from the casing • Attaching the bell to the tube • Removing the bell from the tube • Removing the blade ENGLISH CONTENTS -
ROBOT-COUPE U.S.A., INC. LIMITED WARRANTY YOUR NEW ROBOT-COUPE PRODUCT IS WARRANTED TO THE ORIGINAL PURCHASER FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE. This LIMITED WARRANTY is against defects in the material and/or workmanship, and includes labor for replacement of defective parts, provided repairs are performed by an authorized service agency (see attached list).
KEEP THESE INSTRUCTIONS IN A SAFE PLACE ENGLISH IMPORTANT WARNING W A R N I N G WARNING : In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly.
INTRODUCTION TO YOUR NEW ROBOT-COUPE POWER MIXER Robot-Coupe has developed a complete line of power mixers. The features of each are described in the table below. Models Variable speed Mixer attachment Whisk attachment CMP 250 V.V. • • CMP 300 V.V. • • CMP 350 V.V. • • CMP 400 V.V. • • CMP 250 Combi • • • CMP 300 Combi • • • The Robot-Coupe Power Mixers perform a host of culinary feats.
For optimum efficiency two thirds (2/3) of the tube should be immersed in the product. ASSEMBLY / DISASSEMBLY - BLADE ENGLISH Always make sure that the bell is completely immersed to avoid splashing and that the ventilation openings in the motor housing do not come into contact with any liquid! • Attaching the tube to the motor unit. (only for CMP Combi) TURN TO ATTACH BELL • WHISK OPERATION We recommend that you hold the power mixer by the handle and the bottom of the motor unit.
• Removing the bell from the tube - WHISK - Unplug the power mixer. • Attaching the whisk holder to the motor unit (only for CMP Combi) - Turn the bell in the direction of the arrow next figure) to separate the bell lug tube lug (see • Fitting the whisk into the whisk holder from the . - Remove the bell. C If jammed, turn the blades inside the bell in the direction of the arrow to loosen them from the drive shaft.
CLEANING While griping the ejector in one hand and the holder in the other, pull the ejector in the opposite direction of the arrow. B WA R N I N G • Always unplug the power mixer before cleaning it! • Always dilute bleach according to the instructions on the label A • Removing the ejector Hold the whisk by the wires in one hand. With the other hand, pull the ejector in the direction of the arrow (see figure). B A SPLASH GUARD ASSEMBLY - Put the screw back on the ring and tighten it.
• WHISKS - Pull the plug and try another outlet. The whisks can be cleaned either by hand or in a dishwasher. To ensure effective cleaning, always remove the whisk ejector. - Check outlet for current (breaker or fuse). MAINTENANCE • BLADE Over time the blades will become worn and will need to be replaced. The washer and seals should also be replaced at this time. A blade service kit is available. See warranty first then; • THE POWER MIXER STOPS DURING (WHILE) PROCESSING.
32
33
34
35
36
37
38
39
40
41
42
43
45
P.O. Box 16625, Jackson, MS 39236-6625 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com website: www.robotcoupeusa.com Phone : 1-800-824-1646 Réf.: 404 110 Robot-coupe USA. Inc.
