Specifications

If you have more than 4 pins in the plug please
note the ROBOT-COUPE does not require a neutral
wire.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the motor base, a red arrow marks the blade
rotation direction. If the blade turns in a clockwise
direction, swap over two wires:
Since GREEN/YELLOW is the earth,
DO NOT DISCONNECT.
Swap either: the and the
the and the
the and the
THE LEVER-OPERATED
HOPPER AND ITS TOOLS
This hopper allows you to prepare all types of
vegetables:
- the large feed hopper is used to prepare bulky
vegetables such as cabbage, celery, lettuce, etc.,
- the tube is used to prepare long or fragile fruit or
vegetables.
Two types of tool are designed for the lever-type
hopper:
1) the loading cone
Always remember to fit an ejection tool if
the removable divider is not being used.
32
3
1
2
1
18
INTRODUCTION TO
YOUR NEW VEGETABLE
PREPARATION MACHINE
CL 52 “E” Version
The CL 52 is perfectly geared to professional needs.
It can perform any number of tasks, which you will
gradually discover as you use it.
The CL 52 is equipped with a removable lid, metal
bowl an stainless steel motor base. The full moon
hopper is ideal for cutting large products.
The CL 52 is supplied with a wide range of discs
and grids to satisfy even the most demanding chefs
when it comes to cutting up fruit and vegetables, i.e.
slicing, grating, julienne, dicing and french fried
potatoes discs. The head has been specially
designed to handle bulky vegetables.
Thanks to its simple design, all components requi-
ring frequent handling for maintenance or cleaning
can be fitted and removed in a trice.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
This manual contains important information
designed to help the user get the most out of this
vegetable preparation machine.
We therefore recommend that you read it carefully
before using your machine.
We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.
SWITCHING ON
THE MACHINE
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
identification plate.
•CL52E Single-Phase
ROBOT-COUPE CL 52 are fitted with various types
of motors: 230 V / 50 Hz /1
120 V / 60 Hz /1
220 V / 60 Hz /1
The machine comes with a single-phase plug
connected to a power cord.
•CL52E Three-Phase
ROBOT-COUPE CL 52 are fitted with various types
of motors: 400 V / 50 Hz /3
220 V / 60 Hz /3
380 V / 60 Hz /3
The machine is supplied with a cable to which you
simply attach the appropriate electrical plug for
your system. The cable has four wires, one earth
wire, plus three phase wires.
If you have a 4-pin plug:
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
WARNING
THIS MACHINE MUST BE EARTHED
(RISK OF ELECTROCUTION)