User Manual

Smartphone App Operation
RoboSHOOT
©
User’s Manual Page 36
External Trigger
The External Trigger lets you
set up a sensor to trigger an
action. This is used in any
situation where you wish to
autonomously trigger the
flash, start the
intervalometer, or take an
exposure caused by some
sensed event.
The sensor will be detected
when you plug it into the
External Trigger Port (ECP)
on the Master.
Sensor modules such as an Audio Detector, Optical
Detector, or Digital Trigger are available on a per
request basis subject to availability. You can also
plug in a switch to the Trigger Port to trigger from
switch closures or provide your own sensors. A
detailed specification for trigger port sensors is
available upon request.
MX-20