User Manual

Basic Operation
RoboSHOOT
©
User’s Manual Page 10
Specifications (Blue denotes X-20 only)
Supported
Cameras
Designed for current generation Fujifilm X-
Series cameras.
Supported Fuji
speedlights
All current generation self-powered Fujifilm
X-Series speedlights (EF-X8 not supported).
Supported Nikon
speedlights
Designed for i-TTL. As of this writing: SB-
600, SB-700, SB-900, SB-910 are supported.
Other Speedlights
Nissin i40 (for Fujifilm)
Flash Groups
4 TTL groups, +/- 3 EV relative range
adjustment per group.*
TTL Override*
+/- 3 EV exposure adjust from TTL
Master Flash
Assigned to Group A, fully TTL Controlled.
Timer Config*
Exposure Counter, Initial Delay
Intervalometer
Config*
Exposure Counter, Initial Delay, Interval,
Duration, Profile Bracketing
High-Speed Flash
Config*
Mode (Proportional/Fixed delay), Exposure
Duration, Delay from trigger, Shutter Mode
Trigger Module
Settings*
Trigger Assignment, Trigger Source,
Sensitivity, Sensor select. (optional)
Batteries
2 AAA
Battery Life
Unit on and operational - at least 16 hours
Unit in standby – at least 5 days
Size (LxWxH)
3.3 x 1.7 x 0.9 in (84 x 43 x 23 mm) + 1/2 in
(13 mm) for shoe mount
Weight (without
batteries)
Master - 2 oz (56 g), Slave 1.8 oz (50 g)
Master-Slave
Range
Approximately 60 to 120 ft (depending on
settings and environment)
Radio
2.4GHz Globally License Free ISM Band
Conformance
FCC, CE, RoHS for distribution in United
States and European Community.
App Support
iOS
©
8.3 or later. Android
©
4.0 or Later.
Specifications Subject to change without notice.
* Requires App (MX-20 only)