User Manual

Basic Operation
RoboSHOOT
+
©
User Manual Page 24
Flash Exposure Lock
Flash Exposure Lock (FEL) is engaged by fully clicking
the top button (see page 11). If an exposure was
previously taken, the reference power may be
already available for use. Otherwise, the next
exposure will be used for the reference. If a camera
mode change occurs (exposure mode, aperture, ISO,
etc), the reference will remain active and set using
prior exposure values. This allows for more
creativity. If you wish to compensate you can use
flash exposure compensation (TTL Offset).
Exit FEL by clicking the side button or turning the
camera off/on.
Button Lockout
If the Main LED flashes red every time a button is
pressed, the buttons are locked out. This mode
allows you to prevent unwanted button operations.
Lockout mode is toggled by a 5 second hold on the
top button (fully pressed) and side button at the
same time. The main LEDs will blink red when
lockout is engaged and green when it is disengaged.