User Manual

Basic Operation
RoboSHOOT
+
©
User Manual Page 19
External Ports
External Ports appear on the X-20 devices only. On
the MX-20
+
a Camera Port and Trigger/Sensor port is
present, while on the RX-20 a flash sync port is
present. Use only approved connections on these
ports. If an overvoltage is connected it is not only
unsafe, but it also voids all manufacturer warranties.
Consult Safety guidelines before using external
ports. When using any port Read and follow all
related Safety guidelines carefully. Never connect
to any voltage greater than 6V.
MX-20
+
Ports
The Camera Port provides an optically isolated
shutter and focus release. When doing profile
bracketing, App or Sensor triggered exposures, or
any timing functions connect a shutter release cable
from this port to your camera. If you only have a
mechanical release, several vendors offer electro-
mechanical release adapters.
MX-20