User Manual

Basic Operation
RoboSHOOT
+
©
User Manual Page 17
Main Indicators
The main indicator color and blink rate indicate
specific conditions. Typically, Blue indicates radio
activity, Yellow indicates timing activity, Orange is a
warning, Red indicates flash control, activity and
status, and Green indicates ready status.
MX-20
+
/ MX-15
+
Master Units
Color / Pattern
Indication
Pulsing
Ready with Camera Power On
Blinking
Camera off
Fast Blinking
Check Flash Settings
Slow Pulsing
Low Power Standby
Pulse
Shutter Release
Other
Flash Exposure Lock or Profile
Select Active
Single Pulse
Focusing
Blinking
Intervalometer, Timer, or
Bracketing (MX-20
+
only)
During firmware updates, different indications apply:
Yellow and blue main LEDs indicate activity. Group
LEDs indicate progress. Upon power up, update
mode is indicated by flashing ALL Group LEDs Green,
Red, Green - followed by the main LED blinking
yellow.