User Guide
Table Of Contents
- 1 Safety Notices
- 2 Introduction
- 3 Product Specifications
- 4 Connections
- 5 Communications Protocols
- 6 GPS Synchronization
- 7 Key characteristics
- 8 Point Cloud
- 9 Laser Channels and Vertical Angles
- 10 Calibrated Reflectivity
- 11 Troubleshooting
- Appendix A ▪ Point Time Calculate
- Appendix B ▪ Information Registers
- B.1 Motor(MOT_SPD)
- B.2 Ethernet(ETH)
- B.3 FOV Setting (FOV SET)
- B.4 Motor Phase Offset (MOT_PHASE)
- B.5 Top Board Firmware (TOP_FRM)
- B.6 Bottom Board Firmware (BOT_FRM)
- B.7 Serial Number(SN)
- B.8 Software Version(SOFTWARE_VER)
- B.9 UTC Time(UTC_TIME)
- B.10 STATUS
- B.11 Fault Diagnosis
- B.12 ASCII code in GPRMC Packet
- B.13 Corrected Vertical Angle (COR_VERT_ANG)
- B.14 Corrected Horizontal Offset Angle (COR_HOR_AN
- Appendix C ▪ RSView
- Appendix D ▪ RS-LiDAR-32 ROS Package
- Appendix E ▪ Dimensions
- Appendix G ▪ How to Distinguish the Port Number of
RS-LiDAR-32 User Manual
VI
Terminologies
MSOP
Main Data Stream Output Protocol
DIFOP
Device Info Output Protocol
UCWP
User Configuration Write Protocol
Azimuth
Horizontal angle of each laser firing
Timestamp
The marker that records the system time
Header
The starting part of the protocol packet
Tail
The ending part of the protocol packet