SDS

Fujian SCUD Power Technology Co., Ltd.
Version
V1.9
File Name
BRR-2P4S-5200FL 锂离子电池规格书
Security Level
Internal public
飞毛腿公司机密，未经许可不得扩散。 - 第
19
页 共
25
页 -
wire having a resistance about 40mΩ±10 mΩ.
until the protection circuit starts or the short
circuit time reaches 24h..
/将电池按照标准充电方式充满电后，短路电池
组的正负极端子，外部短路总电阻为 40+/-10m
Ω,直至保护电路起动或者短路时间达到 24h。
Reverse Charge
/反向充电
The standard charged battery should be reverse
charged with recommending current for 90
minutes.
/将电池按标准充电方式充满电后，然后以推荐
充电电流反向充电 90min。
The battery should be no fire, no
explosion, no smoke or no leakage.
/电池应不起火，不爆炸，不冒烟或漏
液。
ESD
/静电放电
The standard charged battery should be test under
ESD ±4kV contact discharge and ±8kV air
discharge for each 5 times. The interval of
discharge is 1min.
/对充饱电后的电池（金属端子）进行±4kV 接
触放电与±8kV 空气放电各 5 次，每次放电间
隔 1 分钟。
The function of battery should be work
well.
/电池所有功能正常。
Drop Impact test
/重物冲击测试
（对于软包装电
池，本条不适用）
Battery is to be placed on a flat surface.
To place 15.8mm±0.2mm diameter bar across
the center of standard charged battery, and drop
9.1kg weight from 610±25mm height onto the
battery. Then keep for 6hr,
/充饱电的电池放置于平面冲击台上，并将一个
直径 15.8mm 的钢柱放置于电池中心，钢柱的
纵轴平行于平面，让质量 9.1kg 的重物从
610mm±25mm 高度自由落到电池中心上方的
钢柱上，测试完毕，观察 6 小时。
The battery should be no fire, no
explosion.
/电池应不起火、不爆炸。
Heating test
/热滥用
A battery is to be heated in a circulating air oven.
The temperature of the oven is to be raised at a
rate of （5℃±2℃）/min to a temperature of
130 °C . The oven is to remain for 30 minutes.
/电池放置于热箱中，温度以（5℃±2℃）/min 的
速率升至 130℃±2℃并保温 30mins。
The battery should be no fire, no
explosion.
/电池应不起火、不爆炸。