SDS

Fujian SCUD Power Technology Co., Ltd.
Version
V1.9
File Name
BRR-2P4S-5200FL 锂离子电池规格书
Security Level
Internal public
飞毛腿公司机密，未经许可不得扩散。 - 第
12
页 共
25
页 -
Acceleration Test
/加速度冲击
After charging according to Spec, the battery is fixed
on the impact table. In the first 3ms, the minimum
average acceleration is 75g.N, the peak acceleration is
150+/-25g.N, and the pulse duration is 6 + / -1ms. The
battery has three acceleration shocks in each direction.
After the test, the battery performs a single discharge
and charging cycle according to the standard charging
mode.
/电池按照 Spec 规定充电后，固定在冲击台上，最
初 3ms 内，最小平均加速度为 75g.N,峰值加速度为
150+/-25g.N,持续脉冲时间为 6+/-1ms,电池每个方
向进行三次加速度冲击。测试后，电池按标准充电
方式进行一次放电充电循环。
The battery should be no fire, no
explosion, or no leakage.
/电池应不起火，不爆炸，不漏液。
Drop Test
/跌落试验
After the battery is charged according to the
regulations, with the whole machine test, the whole
machine sample from the height of 1m position free
drop to the cement floor, from X, Y, Z positive and
negative directions (six directions) each direction free
drop 1 times.
One cycle discharging/charging follow Spec. standard
discharge and charge after the test.
/电池按规定充电结束后，配合整机测试，将整机样
品由高度为 1m 的位置自由跌落到水泥地板上，从
X、Y、Z 正负方向（六个方向）每个方向自由跌落
1 次。
试验后按照规格书定义标准充放电进行一次放电
充电循环。
The battery should be no leakage, no
fire or no explosion.
/电池应不泄露、不起火和不爆炸。
High temperature
stress relieving
/高温应力消除
（注塑成型的热塑
性外壳电池适用）
The standard charged battery is to be placed in a
70+/-2℃ circulating air oven for 7 hours. After
finishing the test, remove it and restore to room
temperature.
The enclosure does not result in the
physical deformation that causes the
internal components to be exposed.