SDS

Fujian SCUD Power Technology Co., Ltd.
Version
V1.9
File Name
BRR-2P4S-5200FL 锂离子电池规格书
Security Level
Internal public
飞毛腿公司机密，未经许可不得扩散。 - 第
10
页 共
25
页 -
5.2 Environmental Safety Test/环境安全试验
Items
Conditions and others
Performances
Low Pressure
/低气压
The standard charged battery is to be stored in the
vacuum chamber. After close the vacuum chamber,
then reduce the pressure, until the internal pressure is
no more than 11.6kPa, and keep for 6 hours.
One cycle discharging/charging follow Spec. standard
discharge and charge after the test.
/充饱电的电池，将其搁置在真空箱中。真空箱密闭
后，逐渐减少其内部压力至不高于 11.6kPa(模拟海
拔 15240m)并保持 6 小时。
试验后按照规格书定义标准充放电进行一次放电
充电循环。
The battery should be no leakage, no
fire and no explosion.
/电池应不泄露、不起火和不爆炸。
Thermal Shock
/温度循环
Battery(standard charged) is repeatedly tested with 10
times heat cycling, which means maintaining the
battery for 6 hours at –40℃±2℃ and 72℃±2℃
respectively.
The interval of temperature change is kept in 30mins.
After cycling, the battery temperature is restored to
the ambient temperature of 20±5℃.
One cycle discharging/charging follow Spec. standard
discharge and charge after the test.
/电池充满电后，将电池放入温控箱中，
1）在温度 72℃±2℃的实验箱中保持 6 小时
2）将实验箱温度降为–40℃±2℃，保持 6 小时
3）温度转换时间不大于 30 分钟
4）重复步骤 1）~2），共循环 10 次。
5）恢复至 20±5℃的环境温度。
试验后按照规格书定义标准充放电进行一次放电
充电循环。
The battery should be no leakage, no
fire and no explosion.
/电池应不泄露、不起火和不爆炸。
Vibration
/震动试验
Cells and batteries are firmly secured to the platform
of the vibration machine without
distorting the cells in such a manner as to faithfully
transmit the vibration. The vibration should be a
sinusoidal waveform with a logarithmic sweep
The battery should be no leakage, no
fire and no explosion.
/电池应不泄露、不起火和不爆炸。