Use and Care Manual
28
Routine Maintenance
Side Brush
Filter Assembly
Mop Cloth
1. Turn the robot over and remove the screw holding the Side
Brush.
2. Remove and clean the Side Brush.
3. Reinstall the Side Brush and tighten the screw.
1. Move your nger along the notch to remove both lters.
2. Install the new lters.
1. Remove the mop cloth from the mopping module.
*
Clean monthly
*
Replacement every 1-3months is recommended
*
Clean after use
Note: It is recommended to replace the Side Brush every 3-6 months to maintain the
cleaning quality.
Note: Changing lters every 1-3 months is recommended, depending on the quality of
water and frequency of use, to ensure cleaning quality.
2. Clean and dry the mop cloth.
•
Always remove the mop cloth after cleaning to avoid lter blockage.
•
If the mop cloth gets excessively dirty, the cleaning quality will be aected. Always use a
clean cloth.
•
Replacing the mop cloth every 3-6 months is recommended to maintain cleaning quality.
Note:
Main Wheels
Use a soft dry cloth to wipe and clean the main wheels.