Use and Care Manual
26
Note: Replacing the Main Brush every 6-12 months is recommended for proper cleaning.
Dustbin and Filter Main Brush
1. Open the top cover of the robot, press the Dustbin Latch, then
lift and remove the Dustbin.
1. Flip the robot over and press the Main Brush Cover Latch to
remove the Main Brush Cover.
2. Remove the Main Brush and clean its bearings.
3. Remove any entangled hair.
4. Reinstall the Main Brush and replace the Main Brush Cover.
2. Remove the Filter and empty the Dustbin.
Routine Maintenance
*
Clean weekly
*
Clean weekly
Main Brush Cover
Main Brush Cover Latch
Main Brush
Main Brush Bearing